A pool table is an elegant design used for indoor sports rooms and patios. The game of pool is played as a way of spending leisure time with friends and family. If the tables were to be made of materials that are durable, they can last around twenty years with less maintenance. The most vulnerable component of the structure is the felt. In consideration of pool table refelting Denver residents should know the procedure.
Felts are the fabrics that are attached to the surface of the pool table. The process of changing the felt is easy and can be done individually from home. The first step will be to determine the size of the table. The measurements are taken using a tape measure. A new felt can be obtained from a sports shop or even home improvement depots. The size taken should be such that there are some 12 inches extra from the width and length. There are usually many colors of felts. The choice of color depends on the individual. You can choose the same color like the current one or go for a different one.
The rails should be removed after that. This is done using a crescent wrench. Bolts attaching the rails are removed. Usually, the rails are also covered by the felt so they will need to be re-felted as well. The rails will then need to be carefully set on the floor close to its position in the table so that a mistake will not be made of attaching the rail to the wrong side.
A staple remover is used when removing the old material. It is used to out staples which are at the felt edges. All felt should be removed from the table so that the newly placed one is perfectly fitted. The one that has been removed can be put in a thrash bag to be disposed later.
The new felt needs to be carefully placed while taking care to inspect that no damaged are done and that there are no stains. A sharp scissor should then be used to cut it, using the border of the table to guide you. Some felt is left over to be used to re-felt the rails.
After the cut has been made, the felt is attached to the top of the table using a stapler. The stapling should start at the mid portion of one end of the felt before the right and left edges are stapled. After this, you should go to the opposite end and tightly pull the felt. It is then stapled in the same way as the previous side.
The side edges will then need to be stapled. You should ascertain that the staples are at an equal distance from each other and lined up in the correct way. For the pockets, 3 slits should be cut on every pocket before wrapping and stapling the felt on the edges of the pockets. The felt is tightly pulled prior to stapling.
Finally, the structure is reassembled. Rails will be attached to their original positions using a crescent wrench. The pocket lines are inserted and the table is ready for use.
Felts are the fabrics that are attached to the surface of the pool table. The process of changing the felt is easy and can be done individually from home. The first step will be to determine the size of the table. The measurements are taken using a tape measure. A new felt can be obtained from a sports shop or even home improvement depots. The size taken should be such that there are some 12 inches extra from the width and length. There are usually many colors of felts. The choice of color depends on the individual. You can choose the same color like the current one or go for a different one.
The rails should be removed after that. This is done using a crescent wrench. Bolts attaching the rails are removed. Usually, the rails are also covered by the felt so they will need to be re-felted as well. The rails will then need to be carefully set on the floor close to its position in the table so that a mistake will not be made of attaching the rail to the wrong side.
A staple remover is used when removing the old material. It is used to out staples which are at the felt edges. All felt should be removed from the table so that the newly placed one is perfectly fitted. The one that has been removed can be put in a thrash bag to be disposed later.
The new felt needs to be carefully placed while taking care to inspect that no damaged are done and that there are no stains. A sharp scissor should then be used to cut it, using the border of the table to guide you. Some felt is left over to be used to re-felt the rails.
After the cut has been made, the felt is attached to the top of the table using a stapler. The stapling should start at the mid portion of one end of the felt before the right and left edges are stapled. After this, you should go to the opposite end and tightly pull the felt. It is then stapled in the same way as the previous side.
The side edges will then need to be stapled. You should ascertain that the staples are at an equal distance from each other and lined up in the correct way. For the pockets, 3 slits should be cut on every pocket before wrapping and stapling the felt on the edges of the pockets. The felt is tightly pulled prior to stapling.
Finally, the structure is reassembled. Rails will be attached to their original positions using a crescent wrench. The pocket lines are inserted and the table is ready for use.