Changing the settings of an antenna is something that you would surely be able to do. However, you have to know the right flow so that this thing would really be able to serve its purpose. This can be helpful for your work and save you a lot of money since you shall not call a professional even for an advice.
The first thing that you should avoid doing is to paint this object. A military CB antenna can be sensitive and this is not the right time for you to bring out your colorful personality. Everything has to blend well with your car for work to keep you from getting reprimanded by your superiors.
You should try to get a grip of yourself when you are tightening those screws. The base can only take so much pressure since it is a small thing. So, have the instinct to know when you have already reached your limits. Have somebody look over you just to get the right amount of tightness in your set up.
Open the bottom part with the use of common tools. However, never use a knife since that can make the lid open more which can pave way to air. If you have a screwdriver, that shall be enough and the next thing that you need to focus on is the location of the main cable. Read the label for you not to have mistakes.
Find capacitor number five and twist it. However, be certain that you have moved to the right while you were counting. That can bring accuracy to your work which is necessary in keeping all the frequencies open for your daily. Without proper communication, you can easily misinterpret the orders being given to you.
Have the right length of cable to connect the antenna and the CB. Do not skim on this one so that you would not go to the store once again. Moreover, wear protective glove since this is the part where in a fitting task would be done. That involved heat with some of the parts and you really have to protect yourself.
Make sure that the cable is properly attached and that they shall be mounted properly. Also the whole set up has to be away from metallic materials. This can improve the reception and keep you from getting in trouble while you are in the battle field. Your safety has to be one of your primary concerns in doing this task.
Use a SWR meter to see if you got the measurements right. If there has been a mistake, be very patient in starting all over again. Buy the same set of materials and know where you got it wrong this time around.
Tightly close the lid after the test. Check it once again since a simple wave of air can destroy all of your efforts. So, put additional materials such as a tape for you to be sure that your antenna will be up and running.
The first thing that you should avoid doing is to paint this object. A military CB antenna can be sensitive and this is not the right time for you to bring out your colorful personality. Everything has to blend well with your car for work to keep you from getting reprimanded by your superiors.
You should try to get a grip of yourself when you are tightening those screws. The base can only take so much pressure since it is a small thing. So, have the instinct to know when you have already reached your limits. Have somebody look over you just to get the right amount of tightness in your set up.
Open the bottom part with the use of common tools. However, never use a knife since that can make the lid open more which can pave way to air. If you have a screwdriver, that shall be enough and the next thing that you need to focus on is the location of the main cable. Read the label for you not to have mistakes.
Find capacitor number five and twist it. However, be certain that you have moved to the right while you were counting. That can bring accuracy to your work which is necessary in keeping all the frequencies open for your daily. Without proper communication, you can easily misinterpret the orders being given to you.
Have the right length of cable to connect the antenna and the CB. Do not skim on this one so that you would not go to the store once again. Moreover, wear protective glove since this is the part where in a fitting task would be done. That involved heat with some of the parts and you really have to protect yourself.
Make sure that the cable is properly attached and that they shall be mounted properly. Also the whole set up has to be away from metallic materials. This can improve the reception and keep you from getting in trouble while you are in the battle field. Your safety has to be one of your primary concerns in doing this task.
Use a SWR meter to see if you got the measurements right. If there has been a mistake, be very patient in starting all over again. Buy the same set of materials and know where you got it wrong this time around.
Tightly close the lid after the test. Check it once again since a simple wave of air can destroy all of your efforts. So, put additional materials such as a tape for you to be sure that your antenna will be up and running.
About the Author:
You can visit www.hascall-denke.com for more helpful information about Modifying A Military CB Antenna.